My Account / Order Status
For contact information
(Your shopping cart is empty)
Vibra-Stop outboard motor backing pad (pair) - Model V6-BP
Usually Ships in 24 Hours
Vibra-Stop outboard motor backing pad for use with outboard motors from 120 HP to 300 H.P. Video shows some of our small pads in action - suggest you watch in full screen mode.
Feel the difference with Vibra-Stop!
Dimensions and fitting information:
Width.............. 4 1/8 inches (each pad, at widest part)
Length............. 15 inches
Thickness........ 5/8 inch
Note: Check distance on center between top mounting bolts on your motor - it must be at least 6 1/2 inches to install these pads, it can be wider but not narrower. These pads must be installed with Anodized Aluminum Keys when used with motors larger than 130HP
Feel the Difference!
Backing Pad Installation Guide:
* Backing pads are designed so that the sharp edge of the pads sit against the transom of the boat, the radius edge is on the motor side.
* Recommended torque setting is between 28-34 ft/lbs - this should be rechecked every 100 hours. Ideal torque is 30 ft/lbs. Do not over tighten your mounting bolts!
* Anodized aluminum key sets must be fitted for engines over 130 HP with slots for the bottom mounting bolts rather than holes.
* It is important to use either nyloc or double lock nuts to secure the engine mounting bolts, spring or lock washers are not suitable for the Vibra-Stop system to secure the engine mounting bolts.
Substantial reduction in vibration levels on large and small boats
Excellent memory retention - will not compress over time
Excellent UV properties - will not break down in the sun
Will not absorb water
Quick and easy to install
Vibra-Stop recommends all backing pads used with motors larger than 130HP be installed with Anodized Aluminum Keys
with questions or for assistance in choosing the right Vibra-Stop system for your boat
Browse for more products in the same category as this item:
Vibra-Stop Motor Backing Pads
Send Us Feedback
Cure Outboard Motor Vibration
Boat ladder parts
Search Engine Optimization
Search Engine Marketing
test message here