My Account / Order Status
For contact information
(Your shopping cart is empty)
Vibra-Stop outboard motor backing pad (pair) - Model 10MM-BP
Usually Ships in 24 Hours
Vibra-Stop outboard motor backing pad for use with outboard motors from 20HP-50HP. Video shows one of our small pads in action - suggest you watch in full screen mode.
Feel the difference with Vibra-Stop pads!
Dimensions and fitting information:
Width.............. 3 3/4 inches (each pad at widest part)
Length............. 12 1/2 inches
Thickness........ 3/8 inch
Note: Check distance on center between top mounting bolts on your motor - it must be at least 5 3/4 inches to install these pads, it can be wider but not narrower. If the on center distance between the top mounting bolts on your motor is 6 1/2 inches or greater we recommend our model MDRNG-BP pad as it is thicker and will absorb more vibration.
Feel the Difference!
Backing Pad Installation Guide:
* Backing pads are designed so that the sharp edge of the pads sit against the transom of the boat, the radius edge is on the motor side.
* Recommended torque setting is between 28-34 ft/lbs - this should be rechecked every 100 hours. Ideal torque is 30 ft/lbs. Do not over tighten your mounting bolts!
* Anodized aluminum key sets must be fitted for engines over 135 HP with slots for the bottom mounting bolts rather than holes.
* It is important to use either nyloc or double lock nuts to secure the engine mounting bolts, spring or lock washers are not suitable for the Vibra-Stop system to secure the engine mounting bolts.
Substantial reduction in vibration levels on large and small boats
Excellent memory retention - will not compress over time
Excellent UV properties - will not break down in the sun
Will not absorb water
Quick and easy to install
with questions or for assistance in choosing the right Vibra-Stop system for your boat
Browse for more products in the same category as this item:
Vibra-Stop Motor Backing Pads
Send Us Feedback
Dixon Stainless Boat Ladders for Sale
Boat ladder parts
Search Engine Optimization
Search Engine Marketing
test message here